02 / Roof Installation

Roof Installation,
Built to Specification.

Two roofs can use the same shingle and last ten years apart. Installation is where a roof is won or lost, so here is the Owens Corning Total Protection Roofing System we install, the standards our crews hold on every deck, and how ventilation and insulation decide how long the whole assembly lasts.

Our Installation Standards

Six Things We Do
On Every Install.

These are not upgrades. They are the baseline of an Armor installation, on a single-family home in Woodstock and on a full subdivision rebuild alike.

01

Deck Inspection First

Soft spots, delaminated sheathing and overdriven nails are corrected before a single shingle goes down. A new roof over a failing deck is money thrown away.

02

A System, Not Just Shingles

Ice and water barrier in the valleys and eaves, synthetic underlayment across the field, starter course, and ridge cap — every component from the same manufacturer system.

03

Flashing Rebuilt, Not Reused

Step flashing at walls and chimneys, new pipe boots, and valley metal formed on site. Flashing is where most leaks start, so we do not bend old metal back into place.

04

Balanced Intake and Exhaust

Soffit intake and ridge exhaust sized to your attic volume so heat and moisture leave the deck alone instead of cooking the shingles from underneath.

05

Nailing Verified to Spec

Correct nail type, pattern and depth, checked before the next course covers the last one. High nailing is the single most common installation defect we find on other roofs.

06

Clean Site, Warranty Registered

Magnet sweep of the yard and driveway, full haul-away of old material, and your manufacturer warranty registered in your name before we leave.

Built in Layers

The Owens Corning® Total Protection Roofing System®

Armor Roofing is an Owens Corning Preferred Contractor. That means every roof we install is engineered as one integrated system — and qualifies for the Preferred Protection Limited Warranty, including up to 50 years of material coverage and 10 years of workmanship protection.

The Material Stack

Roof Composition

Every Armor roof is built from purpose-engineered Owens Corning® components — not just shingles. WeatherLock® self-sealing ice & water barriers seal vulnerable valleys and eaves, ProArmor® synthetic or FIBERGLAS™ reinforced underlayment protects the deck, and architectural shingles with SureNail® Technology lock down against Georgia wind and hail.

  • —WeatherLock® Ice & Water Barrier
  • —ProArmor® / FIBERGLAS™ Underlayment
  • —Starter Shingles + Architectural Shingles
Balanced Airflow

Ventilation

A healthy roof breathes. Owens Corning requires VentSure® ventilation to be part of a balanced air system with both functional intake and exhaust. Proper intake-and-exhaust balance prevents heat and moisture buildup in the attic — extending shingle life, protecting the deck, and cutting heating and cooling costs year-round.

  • —VentSure® Soffit / InFlow® Intake (bottom)
  • —VentSure® Exhaust Ventilation (ridge)
  • —Balanced intake + exhaust = a breathing roof
The 7-Layer System

Overall Build in Layers

Seven integrated layers work together as one system — from fresh-air intake at the soffit, through barriers and underlayment, up to exhaust ventilation at the ridge. Every Owens Corning® component must be present to earn the Preferred Protection warranty.

7
Hip & Ridge ShinglesSeals peaks & ridgelines
6
VentSure® Exhaust VentilationHot air exits at the ridge
5
Owens Corning® ShinglesWater-shedding, wind & impact defense
4
Starter Shingle ProductsSeals the eave edges
3
Underlayment ProductsProArmor® / FIBERGLAS™ deck protection
2
WeatherLock® Ice & Water BarrierSelf-seals vulnerable areas
1
VentSure® Intake VentilationFresh air enters at the soffit

Source: Owens Corning® Preferred Protection Roofing System Limited Warranty customer education literature. Armor Roofing GA LLC is an independent Owens Corning Preferred Contractor.

Balanced Attic Assembly

Why Proper Insulation
and Ventilation Matter

A roof is a system, not just a surface. When intake at the eaves and exhaust at the ridge are matched correctly and the insulation behind them is dry and continuous, the whole assembly performs the way the manufacturer intended.

Extends shingle life

Attic heat bakes shingles from underneath. Balanced intake and exhaust keeps deck temperatures down and slows premature aging.

Prevents deck rot and mold

Moisture that cannot escape condenses on the underside of the sheathing, rotting decking and framing and feeding mold.

Protects your insulation value

Dry insulation performs at its rated R-value. Wet, compressed insulation does not.

Reduces ice dams

A cooler, well-ventilated deck limits the melt-and-refreeze cycle at the eaves that pushes water under shingles.

Lowers cooling costs

A cooler attic takes pressure off your HVAC system through Georgia summers.

Keeps your warranty valid

Most manufacturers require code-compliant ventilation, and we document it at final inspection.

Replacement Materials

Roof Systems
Armor Roofing Installs

Asphalt shingles remain the best value for most Georgia homes, but steep-slope metal, low-slope TPO, and modified bitumen each solve problems shingles cannot. We help you match the system to the roof you actually have.

Preferred Contractor

Owens Corning

  • Duration and TruDefinition architectural shingles
  • Duration Flex for high-wind exposure
  • WeatherLock underlayment and VentSure ventilation
  • Total Protection Roofing System with limited lifetime warranty options
Master-quality shingle systems

CertainTeed by Saint-Gobain

  • Landmark, Landmark Pro, and Presidential lines
  • Northgate for value-minded budgets
  • SureStart PLUS extended warranty coverage
  • Color-matched hip, ridge, and ventilation components
Performance value

IKO

  • Cambridge and Dynasty architectural shingles
  • Nordic for cold and high-wind performance
  • ArmourZone and StormShield impact-resistant options
  • Strong warranty tiers for budget-conscious replacements
Hidden fasteners, decades of service

Standing Seam Metal Roofing

  • 24 and 26-gauge steel with concealed clips
  • Kynar 500 finish with 40 to 70 year service life
  • Excellent wind and hail resistance
  • Ideal for steep slopes, porches, and modern or farmhouse architecture
Economical and straightforward

Corrugated Exposed Fastener Roofing

  • 5V and corrugated panels in multiple colors
  • Best fit for barns, sheds, porch roofs, and outbuildings
  • Fast installation, low material cost
  • Exposed fasteners require periodic inspection and resealing
Single-ply for low-slope residential

TPO Roofing

  • Heat-welded seams for a watertight membrane
  • Reflective white surface reduces cooling load
  • Garage roofs, porch roofs, and room additions
  • Resists ponding, punctures, and UV breakdown
Low-slope bitumen systems

Modified Bitumen Roofing

  • SBS and APP membranes, torch-applied or self-adhered
  • Granulated and reflective cap sheets
  • Shallow-pitch porches, carports, and additions
  • Layered redundancy where standing water is possible
Next Step

Get a Written Replacement
Scope and Price.

Free inspection, photo documentation, and a proposal that lists exactly what your roof needs.